Free Computer Repair Service

A variety of copier maintenance adjustment mode of entry for a (simulated):
(1) Kyocera, Aurora copiers 1087-1087 —
(2) Minolta Copier 1050,1080 Stop -0 – Stop -1 into the self-test function, then 1 + x (x = 3,5,7,8) into the test function;
Stop by the order of -0 – stop -1 – stop – copying keys -4 (11 or 12) – Copy button to enter the adjustment function
1054, 1085 count of keys – to stop -0-0 – Stop -0-1 (ibid.)

(3) Sharp copiers C – Insert – 0 – Insert
(4) Ricoh 4000 series to open the left panel under the hood sw1-8, enter the code, press # key
4418 open on the motherboard sw4
4422, 4015,4615,5632 panel to restore the key (upper right corner ***)- 1,0,7-c button for more than 3 seconds
(5) Toshiba copiers by 0 +5 boot
(6) Xerox press 0 boot
(7) Canon copier 1215,2020,3020 and so on according to the micro-switch on the motherboard (the machine the lower left corner) to enter, and then the implementation of the paging key
6030,4050, etc. inside the front cover according to the micro-switch, press *, 3, * into the adjustment function;
* 4 * into the self-test function
7163,7214, etc. by *- 2,8 (0.3 seconds or more) -* enter

(8) Panasonic copiers 1780,2680, etc. At the same time press the cartons / specifications, 3, clear / stop button

The maintenance of a variety of copiers adjustment mode of entry 2 (digital):
(1) Mita, Aurora copiers 1087-1087 —
(2) Minolta copiers 152,183 count key – Stop -0-0 – Stop -0-1

(3) Sharp Copiers Ar161, 163? 240,200 C – Insert – 0 – Insert
Ar158 C – Exposure button – c – Exposure key
Arm160 # – Insert – 0 – Insert
(4) Ricoh copiers Method 1 means clear = “1 =” 0 = “7 =” Clear / stop Note: Hold down the “Clear / stop” button more than 3 seconds
Method 2
Way clear = “Clear / stop =” Province, Ink = “enter (#)
Note: In China, sales models, and with the “combined the two original” key instead of “provincial road” button
Method 3
Will start, “Clear / stop” and “enter (#) key” pressed together, open the master switch.
Note: Method 3 is different from the other two methods as a special way to enter sp mode. For example, if the power supply a pass, it will indicate a fault code (e-xx), in such situations
, We can only use Method 3 to enter sp mode.

(5) Toshiba copiers by 0 +5 boot
(6) Xerox press 0 boot
(7) Canon copier 1600 # + id key
(8) Panasonic copier 1. Into maintenance mode, when pressed in sequence ‘function’ + ‘Original Size’ + ’3 ‘these few key maintenance mode is selected, then f1 will appear in the display.

2. When the same time, press the ‘functional’ and ‘clear button’, it will be out of maintenance mode
7713,7715, etc. At the same time press the cartons / specifications, under magnification button, clear / stop button