Free Computer Repair Service

Inkjet printer is increasingly becoming the preferred home printer in its daily use because the printing is good, the noise is low, the following maintenance items:
1. Must ensure that the printer in a solid horizontal surface work, do not place any objects on the top of printer. The front cover must be closed to prevent dust from entering the machine when you print, cause unnecessary failures. Printer cables pulling against the live draw, this will damage the printer’s parallel printer port and PC port, serious or even breakdown PC motherboards.
2. Ensure the environment clean.
3. Cartridge is not used up, it is best not to remove, so as to avoid wasting ink or printer of the ink metering errors.
4. Shutdown, let the print head back to the initial position (the printer in pause mode, the print head automatically return to the original location). Some printers (such as the Stylus Color, Stylus Pro XL, MJ-1500K, etc.) will automatically shut down before the print head moved to the initial position; some printers (such as the MJ-800K, Stylus-1000, Stylus ColorII, etc.) must be shut down before the confirmation in a suspended state (that is, to suspend or PAUSE lamp lights) are allowed to shut down. First to do so to avoid the next re-boot the printer print head cleaning operation of a waste of ink: 2 is because the print head can be protected in the initial position of the sealed cover, so difficult to plug the nozzle.
5. Replacement cartridges must be in accordance with the procedures manual, with particular attention to the power of the state open to operate. Because, after re-replacement ink cartridges, printer ink delivery system will be filling ink, and this process will not be turned off to allow the line of the printer can not detect the re-installation of the cartridge.
6. The printer and print cable, power cord, be sure to turn off the printer power supply to operate under.
7. Ink-jet ink has a conductivity, if the leak should be used to sprinkle water on the board of alcohol wipe dry it and then electricity, or they will damage the circuit components.
8. Charged demolition of sprinklers, do not place nozzle is easy to produce static place, pick up nozzle should be to take their metal parts, so as to avoid static electricity damage caused by nozzle internal circuits.
9. Inkjet printers should be in the air relatively clean environments, in particular, should prevent the rodents to avoid being bite through the ink tube.
10. Suitable temperature

Incoming search terms:

• routine maintenance for printer (1)